深圳轮转开槽机_明隆供_南京轮转开槽机商家热线PL-K1 轮转开槽机PL-K1 Rotary Slotter&Scorer整机功能/GENERAL FEATYRES主机与工作台组安装，链条推入式手动送纸；压纸、修边、开槽、切角一次完成。开槽刀相位调整采用行星齿轮机构，电动正反360度均可微调，并附刻度盘显示所调数据。主机采用变频调速装置，在0-70张/分速度范围内实现无级调速，方便客户使用。齿轮材质采用优质碳素结构钢，和优质球铁经调质及齿面高频淬火处理，或正火处理具有较高的齿面硬度；并且齿轮润滑方式采用淋浴式循环润滑，改善了齿轮工作条件，减少噪音。可正反点动机器轻松快捷调机。The machine ａnd the worktable are installed integrally.Paper is pushed ａnd fed by chain manually.Pressing,trimming slotting ａnd cutting can be finished once.Phase of dike cutter is adjusted by the planet gear mechanism which can be fine adjusted within 360 degrees clockwise or antilockwise ａnd is equipped with a dial to show the adjusted data.The main machine is controlled by frequency control device.Stepless speed regulation can be achieved within the scope of0-70 sheets/minutes,which is convenient for customers.Gears are made of high quality carbon steel ａnd cast iron which are quenched ａnd tempered,and gear surface is treated by high frequency quenching or normalizing,so as to ensure high hardness.Gears are lubricated by spray type cycle lubrication which improves working conditions of gears ａnd reduce noise.The machine can be inched clockwise or anticlockwise for quick adjustment.主要技术参数/MAIN SPECIFICATIONS型号/Model15251530相当高生产速度（张/分）7070相当大进纸尺寸Max.Feeding size(mm)1430×25001430×3000相当小进纸尺寸M g size(mm)650×350650×350适应纸板厚度Suitable paperboard thickness(mm)2-112-11开槽宽度Slotting width(mm)77切角宽度Angle cutting width(mm)45mm45mm相当大槽度M depth(mm)300（可加刀）300（可加刀）相当小开缝间隙M ng size(mm)开刀Slotting type R150×150×150×150150×150×150×150反刀Slotting type L270×55×270×55270×55×270×55总功率Total power44