产品名称：圆体方体锻压黄铜球阀系列
Brass ball valves, gate valve, globe valves, check valves, gas valves, temperature control valves, thermostatic controls, balance valves, locking valves, water separator, mixed water device, air conditioner bellows, H valve, butterfly valve, safety valve, filter, exhaust valve, faucet, nozzle, electric two-pass valve, regulating valve, pressure relief valve, bottom valve, steam trap, plug valve, needle valve, drain valve , plunger valve, pressure relief valve, solenoid valve, pressure relief valve, hydraulic control valve, water meter, heat meter, power station valve, instrument valve, joint, flange, elbow, pipe fittings, raw tape

技术规范：1、公称压力：1.6Mpa；2、工作介质：水、油、汽；3、工作温度：-20℃≤t≤120℃；4、测试压力符合 ISO5208 标准；5、圆柱管螺纹符合 ISO228 标准；6、阀门材质：优质黄铜

 

球阀工作原理：
球阀主要用于截断或接通管路中的介质，亦可用于流体的调节与控制，其中硬密封V型球阀其V型球芯与堆焊硬质合金的金属阀座之间具有很强的剪切力，特别适用于含纤维、微小固体颗料等介质。而多通球阀在管道上不仅可灵活控制介质的合流、分流、及流向的切换，同时也可关闭任一通道而使另外两个通道相连。本类球阀在管道中一般应当水平安装。
球阀(ball valve)问世于20世纪50年代，随着科学技术的飞速发展，生产工艺及产品结构的不断改进，在短短的40年时间里，已迅速发展成为一种主要的阀类。在西方工业发达的国家，球阀的使用正在逐年不断的上升。
在我国，球阀被广泛的应用在shi油炼制、长输管线、化工、造纸、制药、水利、电力、市政、钢铁等行业，在国民经济中占有举足轻重的地位。它具有旋转90度的动作，旋塞体为球体，有圆形通孔或通道通过其轴线。
球阀在管路中主要用来做切断、分配和改变介质的流动方向，它只需要用旋转90度的操作和很小的转动力矩就能关闭严密。球阀适宜做开关、切断阀使用，V型球阀。电动阀门除应注意管道参数外，尚应特别注意其使用的环境条件，由于电动阀门中的电动装置是一机电设备，其使用状态受其使用环境影响很大。通常状态下，电动球阀、蝶阀在以下环境使用要特别注意
销售服务：我公司对售出产品，确实是产品质量问题的，实行三包。
Ball valves, gate valve, globe valves, check valves, gas valves, temperature control valves, thermostatic controls, balance valves, locking valves, water separator, mixed water device, air conditioner bellows, H valve, butterfly valve, safety valve, filter, exhaust valve, faucet, nozzle, electric two-pass valve, regulating valve, pressure relief valve, bottom valve, steam trap, plug valve, needle valve, drain valve, Plunger valve, pressure relief valve, solenoid valve, pressure relief valve, hydraulic control valve, water meter, heat meter, power station valve, instrument valve, joint, flange, elbow, pipe fittings, raw tape
Copper Ball Valve Introduction:
The ball valve is mainly used to ｔruncate or connect the media in the pipeline. can also be used for fluid regulation ａnd control, including the hard seal V-type ball valve its V-core ａnd surfacing cemented carbide metal valve seat between the strong shearing force, especially for fiber, micro-solid materials, such as medium.
Ball valve (ball valve), opening ａnd closing parts (ball) driven by the stem, ａnd around the ball valve axis for rotating movement of the valve. can also be used for fluid regulation ａnd control, including the hard seal V-type ball valve its V-core ａnd surfacing cemented carbide metal seat between the strong shearing force, especially for fiber, micro-solids ａnd other media. The multi-pass ball valve can not only control the confluence, shunt ａnd flow of the media flexibly, but also can close any channel ａnd connect the other two channels. This type of valve in the pipeline should generally be installed horizontally. The ball valve is divided into: pneumatic ball valve, electric ball valve, manual ball valve According to the driving mode.
Sales Services: Our company on the sale of products, is indeed a product quality problems, the implementation of three packs.

Q  Q：3345294733
V 信：wxz13362687275
手机：133-6268-7275
座机：0576-8721 9009