RCDC系列风冷自卸式电磁除铁器是一种用于清除散状非磁性物料中铁件的电磁设备。一般安装于皮带输送机的头部或中部，通电产生的强大磁力将混杂在物料中的铁件吸出后由卸铁皮带抛出，达到清除的目的，并能有效地防止输送机皮带纵向划裂，保护破碎机、研磨机等正常工作，所以该系列除铁器广泛应用于电力、矿山、冶金、建材、选煤、化工等行业。

RCDC series air cooled dump type electromagnetic iron remover for electromagnetic equipment to remove bulk nonmagnetic material of iron parts. Usually installed in the belt conveyor head or middle, strong magnetic electricity generated will be mixed in the materials from the iron from iron unloading belt out after aspiration, to achieve clear objectives, ａnd can effectively prevent the conveyor belt longitudinal laceration, protect crusher, grinding machine work normally, so the separator series widely used in electric power, mining, metallurgy, building materials, coal, chemical industry etc..

2、技术特点

◎磁路采用计算机模拟设计，透磁深度大，磁力强。

◎特殊的风道设计，轴流风机强迫风冷，风量大，风压高，是线圈散热快，温升低，冷热态磁场差异小。

◎线圈经特殊的浸漆绝缘及固化处理技术，抗氧化，耐腐蚀，提高整机的绝缘性能，保障长期连续工作不老化。

◎自动卸铁，维护简便，滚筒腰鼓行结构，具备皮带自动纠偏功能，特制全密封轴承座，可实现长期无故障运行。

◎产品配套性好，整流设备功能齐全，具有手动和集控功能，能满足多种场合的使用要求。

Traits:

a. Computer optimized design, reasonable structure, low energy consumption, ａnd stable ａnd reliable performance.

b. Magnetic circuit is computer simulation design, large magnetic permeability ａnd large magnetic intensity.

c. Field coil has a special dealing process in order to improve the coil＇s electrical ａnd mechanical properties. It also has such traits such as temperature rises is lowly, insulation ａnd heat resistance.

d. Easy installation ａnd easy maintenance.

e. Its technical indicators are in line with JB/T7689-2004 standards.

二、产品型号及其含义Model ａnd meaning of the item

 

三、使用条件Service condition

3.1 海拔高度不超过2500米；

The height above sea level should not above 2500meters;

3.2 环境温度不高于+40℃及不低于-25℃；

The surrounding temperature should not over 40℃,and below -20℃

3.3 周围空气的湿度不大于30%（温度为25℃时）；

The relative humidity should not lager than 90%(25℃)

3.4 无雨雪侵袭的地方；

It can work in the place where is no rain ａnd snow.

3.5 在无爆炸危险的介质中，且介质中无足以腐蚀金属和破坏绝缘的气体与尘埃（包括导电尘埃）。

There is no explosive danger in the medium,and there is no erosive gas ａnd dust in the medium which have the influence on Corrosion of metal&insulation(include the conductive dust)