产品介绍
脉冲信号发生器
价 格：￥面议
型 号：PM5786
产品完善度：
生产地：其他访问量：418次
发布日期：2009/11/2 0:00:00
更新日期：1900/1/1 0:00:00
详细内容
名 称：脉冲信号发生器
型 号：PM5786
厂 家：飞利浦
·LED纠正触发水平的显示
技术指标
Time parameters
Pulse repetition period:8 ns to ls(1 Hz to 125 MHz)
Pulse delay:8 ns to 100ms
Pulse duration :3.5ns to 100ms
Transition times:2ns ±10% to 〉100ms ,corresponding to 10% and 90% ofpulse amblitude,For ECL testinge,the minimum transition time is 1.4ns correspondingto 20% and 80% levels.
Jittter:0.1% of setting±50ps
Main pulse characteristics
Outputs:2 channesls,A and B
Pulse amplitude: 0.2 V to 5V (at ZL=50Ω),double amplitude at open output,within the range±6V
DC offset:-2.5V to +2.5V (at ZΔ=50Ω)±5V at open output
Max output voltage:Pulse amplitude plus dc offset is max±6V.Maximum 10Vopen output amplitude can be achieved provided the signal is in the range±6V
Waveform aberrations:Less than 5%+10mV ,less than 10% for transition times2 to 5ns
Source resistance:50Ω±5%
Source impedance:500Ω±10%
Output protection:Against short-and open circuit and transients(3000mA/us,600mA/1sec)
Pulse modes:Single pulse(delayable)double pulse or symmetrical pulse 50%±1%(1Hzto MHz);50%±10%(1MHz to 125MHz)normal or complementary,switchable
Output modes
Bipolar:Simultaneously positive and negative polarity
Positive:Positive polanity,normal and complementary
Negative:Negative polarity,normal and complementary
External operating modes
Trigg:Externally triggered pulse repetition DC to 125 MHz or manual singleshot
Gate:Synchronous gating,external input signal starts and stops the generator
Burst:(PM 5768B only)Internally generated burst with push wheel se-lectionof mumber of pulses 0 to 9999 started by external input signal or manualcontrol
External duration:External duration gives pulses with same duration andrepetition rate as exteranl input signal all other pulse pqrameters areset via the generator
External input
Range :DCA to 125MHz minimum pulse duration 3.5ns
Input voltage range:0.5 to 15V pp
Coupling:DC
Input impedance:1MΩ//25pF
Trigger level :-3V to +3V
Trigger slope:+and -
Trigger indicator:Tri-state LEK ,blinking for proper triggering
Max input voltage:260V rms at 〈440Hz,reducing to 15V pp at 125MHz
Internal clock output
Main output pulse is delayble:with respect to internal clock output,whichtherefore can be used as pre-trigger
Amplitude:+2.5V into 50Ω
Output impedance:50(typical)
Translition time :Approximately 1ns
Pulse duration:Symmetrical pulse,50%±1%(1Hz to 1MHz )50%±10%(1MHz to 125MHz)
Output protection:Against short-and open circuit and transients
Time setting error ineicators:Warning for erroneous settings of excessivetimes for pulse delay,pulse duration,leading and trailing transition times,indicated with 4 LEDs
Power requirements
Line:100V,120V,220V and 240V rms ±10%,120VA 50 to 60Hz
Mains interference:Below VDE 0871 level B and MIL-STD 461A
Safety:According to CE-regulation 73/23 EN61010-1 CAT II ,Polution Degree2
EMC:According to CE regulation 89/336:Emission according to EN 550081-1,EN55022 Class B,EN60555-2,Immunity accoreing to EN 5082-1,inclusive IEC801-2,-3,-4,-5.
Dimensions and weight
Maximum dimensions
Height:145 mm(5.7in)
Width:300mm(11.8in)
Depth:470mm(18.5in)
Weight:Net 9.5kg(21Lb)
Shipping :11.5kg(25Lb)
Climatic Conditions
Ambient temperature
Rated range of use:0 °to 50℃
Storage and transport:-40℃ to +70℃
Relative humidity
Rated range of use:10 to 90% RH,noncondensing
Storage and transpout:5 to 95% RH,
Barometric pressure(altitude)
Rated range of use:5000m (15000 ft)-53.3kN/m2
Storage and transport:15000m(50000 ft)-15.2dN/m2
电话：010 - 62123258 / 59 地址：北京海淀区大柳树路富海中心4号楼105室
型 号：PM5786
厂 家：飞利浦
·LED纠正触发水平的显示
技术指标
Time parameters
Pulse repetition period:8 ns to ls(1 Hz to 125 MHz)
Pulse delay:8 ns to 100ms
Pulse duration :3.5ns to 100ms
Transition times:2ns ±10% to 〉100ms ,corresponding to 10% and 90% ofpulse amblitude,For ECL testinge,the minimum transition time is 1.4ns correspondingto 20% and 80% levels.
Jittter:0.1% of setting±50ps
Main pulse characteristics
Outputs:2 channesls,A and B
Pulse amplitude: 0.2 V to 5V (at ZL=50Ω),double amplitude at open output,within the range±6V
DC offset:-2.5V to +2.5V (at ZΔ=50Ω)±5V at open output
Max output voltage:Pulse amplitude plus dc offset is max±6V.Maximum 10Vopen output amplitude can be achieved provided the signal is in the range±6V
Waveform aberrations:Less than 5%+10mV ,less than 10% for transition times2 to 5ns
Source resistance:50Ω±5%
Source impedance:500Ω±10%
Output protection:Against short-and open circuit and transients(3000mA/us,600mA/1sec)
Pulse modes:Single pulse(delayable)double pulse or symmetrical pulse 50%±1%(1Hzto MHz);50%±10%(1MHz to 125MHz)normal or complementary,switchable
Output modes
Bipolar:Simultaneously positive and negative polarity
Positive:Positive polanity,normal and complementary
Negative:Negative polarity,normal and complementary
External operating modes
Trigg:Externally triggered pulse repetition DC to 125 MHz or manual singleshot
Gate:Synchronous gating,external input signal starts and stops the generator
Burst:(PM 5768B only)Internally generated burst with push wheel se-lectionof mumber of pulses 0 to 9999 started by external input signal or manualcontrol
External duration:External duration gives pulses with same duration andrepetition rate as exteranl input signal all other pulse pqrameters areset via the generator
External input
Range :DCA to 125MHz minimum pulse duration 3.5ns
Input voltage range:0.5 to 15V pp
Coupling:DC
Input impedance:1MΩ//25pF
Trigger level :-3V to +3V
Trigger slope:+and -
Trigger indicator:Tri-state LEK ,blinking for proper triggering
Max input voltage:260V rms at 〈440Hz,reducing to 15V pp at 125MHz
Internal clock output
Main output pulse is delayble:with respect to internal clock output,whichtherefore can be used as pre-trigger
Amplitude:+2.5V into 50Ω
Output impedance:50(typical)
Translition time :Approximately 1ns
Pulse duration:Symmetrical pulse,50%±1%(1Hz to 1MHz )50%±10%(1MHz to 125MHz)
Output protection:Against short-and open circuit and transients
Time setting error ineicators:Warning for erroneous settings of excessivetimes for pulse delay,pulse duration,leading and trailing transition times,indicated with 4 LEDs
Power requirements
Line:100V,120V,220V and 240V rms ±10%,120VA 50 to 60Hz
Mains interference:Below VDE 0871 level B and MIL-STD 461A
Safety:According to CE-regulation 73/23 EN61010-1 CAT II ,Polution Degree2
EMC:According to CE regulation 89/336:Emission according to EN 550081-1,EN55022 Class B,EN60555-2,Immunity accoreing to EN 5082-1,inclusive IEC801-2,-3,-4,-5.
Dimensions and weight
Maximum dimensions
Height:145 mm(5.7in)
Width:300mm(11.8in)
Depth:470mm(18.5in)
Weight:Net 9.5kg(21Lb)
Shipping :11.5kg(25Lb)
Climatic Conditions
Ambient temperature
Rated range of use:0 °to 50℃
Storage and transport:-40℃ to +70℃
Relative humidity
Rated range of use:10 to 90% RH,noncondensing
Storage and transpout:5 to 95% RH,
Barometric pressure(altitude)
Rated range of use:5000m (15000 ft)-53.3kN/m2
Storage and transport:15000m(50000 ft)-15.2dN/m2
电话：010 - 62123258 / 59 地址：北京海淀区大柳树路富海中心4号楼105室
