产品介绍
纳米级超高压均质机 C-55
价 格：￥电议
型 号：
产品完善度：
生产地：其他访问量：319次
发布日期：2009/11/2 0:00:00
更新日期：1900/1/1 0:00:00
详细内容
EmulsiFlex 系列纳米级均质机工艺精湛，样品路径无O形环或垫片，全部为金属对金属，或金属对陶瓷接触，不宜磨损，坚固耐用，均质阀易于拆装，清洗简便，全套设备可拆解后高温高压灭菌及在线蒸气灭菌，完全符合GMP标准和美国食品及药物管理局（FDA）的要求。
EmulsiFlex-C55型
处理能力：55升/小时
（与工作压力无关）
小样品量：30毫升
压力：30,000磅/平方英寸
处理效果达到50nm以下
1. Pump
The EmulsiFlex-C55 homogenizer is powered by an electric motor. There are no "O"-rings or gaskets in the entire path of the product.
2. Homogenizing Valve
The standard EmulsiFlex-C55 is delivered with a pneumatically controlled, dynamic homogenizing valve.
3. Capacity/Pressure
Flow rate is independent of homogenizing pressure which is adjustable between 500 and 30000psi or 35 and 2000bar. The EmulsiFlex-C55 has a capacity of 55L/hr and it can process a sample as small as 30mL.
4. Temperature Control
Inlet and outlet temperatures can be controlled with the installation of an appropriate heat exchanger.
5. Cleaning and Sterilization
The EmulsiFlex-C55 is steam-in-place (SIP) sterilizable and suitable for clean room and GMP manufacturing. The wetted parts are autoclavable.
6. Requirements for Operation
The EmulsiFlex-C55 requires electric power of any common voltage (208V/230V, 380V/400V, 460V, 600V), 3-phase, 50Hz or 60Hz.
EmulsiFlex-C55型
处理能力：55升/小时
（与工作压力无关）
小样品量：30毫升
压力：30,000磅/平方英寸
处理效果达到50nm以下
1. Pump
The EmulsiFlex-C55 homogenizer is powered by an electric motor. There are no "O"-rings or gaskets in the entire path of the product.
2. Homogenizing Valve
The standard EmulsiFlex-C55 is delivered with a pneumatically controlled, dynamic homogenizing valve.
3. Capacity/Pressure
Flow rate is independent of homogenizing pressure which is adjustable between 500 and 30000psi or 35 and 2000bar. The EmulsiFlex-C55 has a capacity of 55L/hr and it can process a sample as small as 30mL.
4. Temperature Control
Inlet and outlet temperatures can be controlled with the installation of an appropriate heat exchanger.
5. Cleaning and Sterilization
The EmulsiFlex-C55 is steam-in-place (SIP) sterilizable and suitable for clean room and GMP manufacturing. The wetted parts are autoclavable.
6. Requirements for Operation
The EmulsiFlex-C55 requires electric power of any common voltage (208V/230V, 380V/400V, 460V, 600V), 3-phase, 50Hz or 60Hz.
