产品介绍
散热风扇12038交流风扇
价 格：￥20
型 号：RG12038B220H
产品完善度：
生产地：其他访问量：39次
发布日期：2013/10/14 15:47:35
更新日期：2013/11/6 9:28:42
详细内容
12038散热风扇饮水机风扇的详细描述：
| 否提供加工定制：否 | 类型：轴流风扇 | 品牌：仁钢－－RG |
| 型号：RG120*120*38MM | 电机功率：15（w） | 电压：220（V） |
| 电流：0.13（A） | 适用范围：家用电器，机械设备通用 | 风量：87CFM |
| 转速：2800RPM |
深圳市仁钢电子公司专业生产经营全系列交/直流风机，
公司技术力量雄厚、设备齐全、工艺先进，产品远销国内外市场。
主要用于投影机，DVD，机箱，电源，功放，移动硬盘，
饮水机，车载冰箱设备。
公司服务宗旨：坚持市场科技相结合，以专业、负责的态度为新老客户提供满意的产品。
| 规 格 说 明 书 | ||||||||
| Specificati | ||||||||
| 3、机构 Mechanical | ||||||||
| 3-1、外观尺寸 External dimension | 120*120*38 MM | |||||||
| 3-2、重量 Weight | 520g（lead wire 80mm& withoutconnector） | |||||||
| 3-3、轴承 Bearing | 滚珠轴承ball bearing | |||||||
| 4、 电气特性 Electrical characteristics（在通风及额定电压条件下 in free air atrated voltage） | ||||||||
| 4-1、额定电压 Rated voltage | 220V | |||||||
| 4-2、额定电流 Rated current | 0.132A | |||||||
| 4-3、额定输入功率 Rated input power | 16W | |||||||
| 5、 效率 Efficiency | ||||||||
| 5-1、风扇转数 Rated speed（范围 range） | 2720RPM | |||||||
| 5-2、风量 Maximum air flow | 65CFM | |||||||
| 5-3、静压 Maximum static air pressure | 0.29Inch-H2O | |||||||
| 6、 特性规格 Characteristics | ||||||||
| 6-1、 操作电压 Operating voltage range | 175－－240V | |||||||
| 6-2、 起动电压 Staring voltage | 150V（ON/OFF） | |||||||
| 6-3、 锁定电流 Locked current | 0.165A（Reference） | |||||||
| 6-4、 操作温度 Operating temperature | -10℃~+70℃ | |||||||
| 6-5、 储存温度 Storage temperature | -30℃~+85℃ | |||||||
| 6-6、 环境湿度测试 Environment humidity | 10%（RH）45℃ for 24 hours & 98% （RH） 45℃for 24 hours | |||||||
| 6-8、 绝缘阻抗强度 Insulation resistance | 在本体与两条导线间加 500V直流电压之绝缘阻抗10MΩ以上 At least 10MΩ at 500 VDC between housing ａnd both lead wires | |||||||
| 6-9、 绝缘耐压强度 Dielectric strength | 必须能抵抗在本体与两线间加 1800V 交流电压1分钟1mA Withstand 1800 VAC 1 minute 1mA between housing ａnd both leadwires | |||||||
| 6-10、预期寿命（MTBF）：指在额定电压及正常温度，湿度条件下连续运转。 | ||||||||
| Life ecpectance:continuous operation at rated voltage ａnd normaltemperature & humidity | ||||||||
| 6-10-1、含油轴承寿命：20000小时 | ||||||||
| Sleeve bearing life expectance:20000Hours | ||||||||
| 6-10-2、双滚珠轴承预期寿命：50000小时 | ||||||||
| Two balls bearing life expectance:50000Hours | ||||||||
| 6-11、端子抗拉强度 Tensible strengthof connector | 端子以1公斤的拉力拉扯15秒不会脱落 | |||||||
| Connector will not be anybroken at 1 Kg for 15 seconds per piece. | ||||||||
| 规 格 说 明 书 | ||||||||
| Specificati | ||||||||
| 11、注意事项（Notes）: | ||||||||
| 11-1、使用时请勿超出本规格所规定之极限，否则我们不保证此产品 | ||||||||
| We will not guarantee the products if the application of ourproducts are exceeded the limitation which is specified on thisspecification. | ||||||||
| 11-2、倘若要变更此份文件的任何规格，请务必事先提出需求 | ||||||||
| In case of changes of the specification specified on thisdocument.A written notice is requested in advance. | ||||||||
| 11-3、请勿触压着叶片以及电源线缠绕着风扇或用力拉扯电源线，如此轴心与电源线将会被损毁 | ||||||||
| Please do not touch the impeller with the pressure ａnd never bringthe fan with lead wire.The bearing ａnd lead wire may bedamaged. | ||||||||
| 11-4、本产品不保证因粉尘、水滴、小虫进入，而影响寿命与不良品产生 | ||||||||
| No guarantee on the products against the safety problem or failurecaused by powder dust, ｄrop of water or insect. | ||||||||
| 11-5、如有任何资料及文件与此份资料不同，将以此份资料为主要参考 | ||||||||
| If there is any data or related documentation different from thisdata sheet.This data sheet is the principle reference. | ||||||||
| 11-6、请勿在可燃性气体与任何有害环境中使用 | ||||||||
| Please do not use the fan in the environment of corrosive gas orliquid or any detrimental gas. | ||||||||
| 11-7、当风扇于运转中，请勿企图将风扇锁死特别长的时间，如此，会因连续停止不转，产生高热而烧毁风扇 | ||||||||
| While the fan is in operation, please do not lock the fanintentionally for a long periods of time, since the continuousstoppage will result in overheat ａnd thus burnt out thefan | ||||||||
| 11-8、组装风扇时，请特别注意，因共振或振动产生的噪音 | ||||||||
| During the installation of the fan, please pay substantialattention to possible notice caused by resonance vibration andshock. | ||||||||
| 11-19、当搬运或作业中，风扇如从60cm的高度落下，将会对叶片的平衡产生若干影响，特别是滚珠轴承避免掉落 | ||||||||
| It is very important to notify that avoid to ｄrop from 60cm heightwhen in any movement or operation,it will impact the balance ofblade. Especially ball bearing structure is avoided to dropdown. | ||||||||
| 11-10、锁外壳之螺丝扭力不得超 4Kgf | ||||||||
| The torque of the screw which locked the frame should not exceed 4Kgf |
