产品介绍
12038鼠笼式散热风机 .
价 格：￥电议
型 号：RG12038B220H
产品完善度：
生产地：其他访问量：73次
发布日期：2013/10/14 15:59:20
更新日期：2013/11/6 9:28:42
详细内容
| 深圳市仁钢电子公司专业生产经营全系列交/直流风机，公司技术力量雄厚、设备齐全、工艺先进，产品远销国内外市场 |
 |
| 详细信息： |
| 是否提供加工定制：否 | 类型：轴流风扇 | 品牌：仁钢－－RG |
| 型号：RG120*120*38MM | 电机功率：15（w） | 电压：220（V） |
| 电流：0.13（A） | 适用范围：家用电器，机械设备通用 | 风量：87CFM |
| 转速：2800RPM |
深圳市仁钢电子公司专业生产经营全系列交/直流风机，
公司技术力量雄厚、设备齐全、工艺先进，产品远销国内外市场。
主要用于投影机，DVD，机箱，电源，功放，移动硬盘，
饮水机，车载冰箱设备。
公司服务宗旨：坚持市场科技相结合，以专业、负责的态度为新老客户提供满意的产品。
公司服务宗旨：坚持市场科技相结合，以专业、负责的态度为新老客户提供满意的产品。
| 规 格 说 明 书 | ||||||||
| Specifications | ||||||||
| 3、机构 Mechanical | ||||||||
| 3-1、外观尺寸 External dimension | 120*120*38 MM | |||||||
| 3-2、重量 Weight | 520g（lead wire 80mm& without connector） | |||||||
| 3-3、轴承 Bearing | 滚珠轴承ball bearing | |||||||
| 4、 电气特性 Electrical characteristics（在通风及额定电压条件下 in free air at rated voltage） | ||||||||
| 4-1、额定电压 Rated voltage | 220V | |||||||
| 4-2、额定电流 Rated current | 0.132A | |||||||
| 4-3、额定输入功率 Rated input power | 16W | |||||||
| 5、 效率 Efficiency | ||||||||
| 5-1、风扇转数 Rated speed（范围 range） | 2720RPM | |||||||
| 5-2、风量 Maximum air flow | 65CFM | |||||||
| 5-3、静压 Maximum static air pressure | 0.29Inch-H2O | |||||||
| 6、 特性规格 Characteristics | ||||||||
| 6-1、 操作电压 Operating voltage range | 175－－240V | |||||||
| 6-2、 起动电压 Staring voltage | 150V（ON/OFF） | |||||||
| 6-3、 锁定电流 Locked current | 0.165A（Reference） | |||||||
| 6-4、 操作温度 Operating temperature | -10℃~+70℃ | |||||||
| 6-5、 储存温度 Storage temperature | -30℃~+85℃ | |||||||
| 6-6、 环境湿度测试 Environment humidity | 10%（RH）45℃ for 24 hours & 98% （RH） 45℃ for 24 hours | |||||||
| 6-8、 绝缘阻抗强度 Insulation resistance | 在本体与两条导线间加 500V 直流电压之绝缘阻抗10MΩ以上 At least 10MΩ at 500 VDC between housing ａnd both lead wires | |||||||
| 6-9、 绝缘耐压强度 Dielectric strength | 必须能抵抗在本体与两线间加 1800V 交流电压1分钟 1mA Withstand 1800 VAC 1 minute 1mA between housing ａnd both lead wires | |||||||
| 6-10、预期寿命（MTBF）：指在额定电压及正常温度，湿度条件下连续运转。 | ||||||||
| Life ecpectance:continuous operation at rated voltage ａnd normal temperature & humidity | ||||||||
| 6-10-1、含油轴承寿命：20000小时 | ||||||||
| Sleeve bearing life expectance:20000Hours | ||||||||
| 6-10-2、双滚珠轴承预期寿命：50000小时 | ||||||||
| Two balls bearing life expectance:50000Hours | ||||||||
| 6-11、端子抗拉强度 Tensible strength of connector | 端子以1公斤的拉力拉扯15秒不会脱落 | |||||||
| Connector will not be any broken at 1 Kg for 15 seconds per piece. | ||||||||
| 规 格 说 明 书 | ||||||||
| Specifications | ||||||||
| 11、注意事项（Notes）: | ||||||||
| 11-1、使用时请勿超出本规格所规定之极限，否则我们不保证此产品 | ||||||||
| We will not guarantee the products if the application of our products are exceeded the limitation which is specified on this specification. | ||||||||
| 11-2、倘若要变更此份文件的任何规格，请务必事先提出需求 | ||||||||
| In case of changes of the specification specified on this document.A written notice is requested in advance. | ||||||||
| 11-3、请勿触压着叶片以及电源线缠绕着风扇或用力拉扯电源线，如此轴心与电源线将会被损毁 | ||||||||
| Please do not touch the impeller with the pressure ａnd never bring the fan with lead wire.The bearing ａnd lead wire may be damaged. | ||||||||
| 11-4、本产品不保证因粉尘、水滴、小虫进入，而影响寿命与不良品产生 | ||||||||
| No guarantee on the products against the safety problem or failure caused by powder dust, ｄrop of water or insect. | ||||||||
| 11-5、如有任何资料及文件与此份资料不同，将以此份资料为主要参考 | ||||||||
| If there is any data or related documentation different from this data sheet.This data sheet is the principle reference. | ||||||||
| 11-6、请勿在可燃性气体与任何有害环境中使用 | ||||||||
| Please do not use the fan in the environment of corrosive gas or liquid or any detrimental gas. | ||||||||
| 11-7、当风扇于运转中，请勿企图将风扇锁死特别长的时间，如此，会因连续停止不转，产生高热而烧毁风扇 | ||||||||
| While the fan is in operation, please do not lock the fan intentionally for a long periods of time, since the continuous stoppage will result in overheat ａnd thus burnt out the fan | ||||||||
| 11-8、组装风扇时，请特别注意，因共振或振动产生的噪音 | ||||||||
| During the installation of the fan, please pay substantial attention to possible notice caused by resonance vibration ａnd shock. | ||||||||
| 11-19、当搬运或作业中，风扇如从60cm的高度落下，将会对叶片的平衡产生若干影响，特别是滚珠轴承避免掉落 | ||||||||
| It is very important to notify that avoid to ｄrop from 60cm height when in any movement or operation,it will impact the balance of blade. Especially ball bearing structure is avoided to ｄrop down. | ||||||||
| 11-10、锁外壳之螺丝扭力不得超 4Kgf | ||||||||
| The torque of the screw which locked the frame should not exceed 4 Kgf |
