Type of connector Power supply terminals

40 40 poles （Common terminals)

Terminal number of poles

DIN Track mounting

Ordering Information

Ratings ａnd Specifications

Dimensions

Wiring Diagram Label Contents

Appearance Specification Number of poles Model

+ Common terminal

40

XW2R-P40PD-COM

− Common terminal XW2R-P40MD-COM

+ − Mix terminal XW2R-P40BD-COM

Rated current 10A(Unit total)

Rated voltage 125VDC/240VAC

Insuration resistance 100MΩmin. (at 500VDC)

Ambient operating

temperature 0 to 55°C

Applicable

wires

Applicable

wire sizes

Ferrule:AWG24 to 14

 (0.2mm2 to 2mm2）

Stranded or solid wire:AWG 28 to 14

 (0.08mm2 to 2mm2)

(Outer diameter of insulation must be

4 mm max)

Stripped

length

AWG28-16: 8 to 10 mm

AWG14: 9 to 10 mm19.7

(33.1)

形XW2R-P40PD-COM

1 2 3 4 5 6 7 8 910 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 910

形XW2R-P40MD-COM 形XW2R-P40BD-COM XW2R-P40PD-COM Upper +++++++++ +

Lower +++++++++ +

XW2R-P40MD-COM Upper − −−−−−−− − −

Lower − −−−−−−− − −

XW2R-P40BD-COM Upper +++++++++ +

Lower − −−−−−−− − −

123456789 10

Details on Crimp Terminals

Applicable Ferrules

• Use ferrules of the lengths ａnd thicknesses

specified below.If other lengths or thicknesses

are used, connection maynot be possible or it

may not be possible to ｉnsert or remove the

posts.

• Ferrule Dimensions

Refer to page 46 for information on Square/Round ferrule ａnd use tool.

Square

ferrules

Dimension A

(Width) 2.7 mm max. The cross-sectional area

after crimping must be

4.8 mm2 or less Dimension B

 (Height) 2 mm max.

Round

ferrules

Dimension C

(Diameter) 2 mm dia. max. (after crimping)

XW2R

46

Safety Precautions

Wiring Precautions

• Do not perform wiring work, remove connectors, or connect connectors while power is being supplied.

Electric shock or damage to the device may result.

• Double-check all wiring before turning ON the power supply.

• After wiring, route the cable so that force is not applied directly to the connections.

Wires for Terminal Blocks

• Do not damage the cores when stripping the insulation from them.

• Always twist stranded wires together before connecting them.

Do not presolder wires. It may not be possible to connect them or remove them
 成都鑫业达自动化成套设备有限公司正品  现货供应    欢迎来电咨询   
联系人：杨小姐    电话：15828214867     座机：  QQ：2049063673