齐一生物销售：021－6034 8496；181214 53965；173021 04490

1。我必须运行所有的标准和样品的重复？

是的，重复的运行，以监测测定的精度和提高检测结果的信心。

2。我必须在一次运行所有的样品吗？

不，每个试剂盒采用stripwell微孔板。这允许用户在不同的时间来分析不同数量的样品。

3。什么类型的可重复性的结果，得到与分析？

每一个工具都有一个包含一个典型数据的图表的手册。在运营商的任何变化，移液和洗涤技术，培养时间、温度、试剂盒的年龄可以引起变化的结果。每个用户都应该得到自己的标准曲线。

4。是否有可能储存的试剂比表示？

在不推荐使用条件下的部件组件的存储，以保证测试的正确性能。

5。我应该如何储存我的样品？

样品应保存在-20°C或更低的温度。长期储存，建议冻结他们在- 70余。

6。我可以修改协议吗？

BG的ELISA试剂盒进行了优化，提供佳的结果。修改的格式或协议可能会给出错误的结果。

7。我可以使用一个不建议在试剂盒插入的样本类型吗？

该试剂盒已被验证在试剂盒插入的样品类型。未经检验的样品类型。为进一步信息的联系技术服务。

8。我的样本产生的值，在动态范围内的测定。我可以使用这些值吗？

建议只有在标准曲线的范围内下降的样本值。标准曲线的范围内的值一般是非线性的，这可能导致不正确的外推值。产生值高于标准的样品应为（进一步）稀释和重复。如果样品低于该测定的范围内，该样品被认为是不可检测的。

9。我每次都要运行一个空白或零标准吗？

是的，这些都是必需的计算，并反映任何微妙但显着的性能变化，从一天到一天，检测到检测。当排除特定的检测问题的来源时，它们也非常有帮助。

10。我能改变我在检测中使用的样本量吗？

不建议你改变卷由于BG工具被设计为佳的性能在给定的体积

11。可以使用不同的组件组件吗？

每一个组件包含有特定批号的组件，以确保所有的组件都进行优化，以及与组件中的所有其他组件。对这些特定的地段进行质量检验。这是从来没有建议使用你自己的组件或组件从其他包或供应商。

12。我的标准曲线看起来很好，但我没有得到一个信号，我的样本，当我预期，为什么？

样品不包含被分析物。一个矩阵的效果可能是掩盖检测。确保推荐的稀释液在试剂盒插入后按规定进行。如果建议稀释，请检查是否正确进行稀释。过稀释会导致样品在标准曲线的范围内下降。

13。你怎么推荐我洗盘子？

如果您使用的是一个自动平板洗衣机，我们建议定期检查校准，并将该系统在洗涤前冲洗缓冲液冲洗。手动洗衣机也是一样的。一个中继器或洗瓶也可以使用。用户应小心，以确保所有的内容都是送气和板拍干的无尘纸。【小鼠γ干扰素(IFN-γ)ELISA试剂盒价格】

14。我需要用一个盘子吗？

可靠的结果可以得到无板振动，但外径的一般会低于那些使用平板振动器。

15。为什么我要用波长校正450-570nm之间？

对于酶联免疫吸附试验，在双波长读的是做正确的光密度贡献的塑料以及，灯和光学波动。

16。如果我提我的样本，我还需要遵循推荐的稀释液试剂盒中插入了吗？

提取过程中所需的样本稀释量将受到影响的纯化和浓度的影响的协议使用。稀释或浓缩的金额将由终用户决定。

17。什么是预期的分析物浓度，我应该找到？

一个给定的分析物的量可能会有所不同，不仅从物种的物种，但也组织和细胞来源。这个信息的佳来源是目前的文献，很容易通过互联网在多个科学数据库访问。

18。我的光密度有点高（或较低），比那些在手册中，与我的试剂盒来了。为什么？

光学密度受影响

1.    Do I have to run all of my standards ａnd samples in duplicate?

Yes, the duplicates are run in order to monitor assay precision ａnd increase confidence in the assay results obtained.

2.    Do I have to run all of my samples at one time?

No, each kit uses stripwell microplate. This allows the user to analyse different numbers of samples at different times.

3.    What types of reproducible results are obtained with the assays?

Each kit comes with a manual containing a graph of typical data obtained. Any variation in operator, pipetting ａnd washing technique, incubation time or temperature, ａnd kit age can cause variation in result. Each user should obtain their own standard curve.

4.    Is it possible to store the reagents other than indicated?

Storage of the kit components under conditions other than indicated is not recommended in order to assure proper performance of the test.

5.    How should I store my samples?

Samples should be stored at -20oC or lower temperature. For long-term storage, it is recommended to freeze them at -70oC -80oC.

6.    Can I modify the protocol?

BG ELISA kits have been optimized to provide the best possible results. Modifying the format or protocol may give inaccurate ａnd wrong results.

7.    Can I use a sample type that is not recommended in the kit insert?

The kit has been validated for the sample types listed in the kit insert. Sample types other than those validated have not been tested. Contact Technical Service for further information.

8.    My samples generated values that were outside the dynamic range of the assay. Can I use these values?

It is recommended that only sample values that fall within the range of the standard curve be used. Values outside the range of the standard curve are generally non-linear, which can lead to incorrectly extrapolated values. Samples that generate values higher than the highest standard should be (further) diluted ａnd the assay repeated. If samples fall below the range of the assay, the sample is considered to be non-detectable. 【小鼠γ干扰素(IFN-γ)ELISA试剂盒价格】

9.    Do I have to run a Blank or Zero Standards every time?

Yes, these are required for the calculations, ａnd reflect any subtle but significant performance changes from day to day ａnd assay to assay. They are also extremely helpful when troubleshooting the source of a particular assay problem.

10.  Can I alter the volume of sample I use in the assay?

It is not recommended that you alter the volumes since all BG kits are designed for optimal performance at the given volumes

11.  Can components from different kits be used?

Each kit contains components which have specific lot numbers to ensure that all of the components are performing optimally alone, as well as with all of the other components in the kit. QC testing is performed on these specific lots. It is never recommended to use your own components or components from other kits or vendors.

12.  My standard curve looked fine, but I didn’t get a signal in my sample when I expected to, why?

The sample may not contain the analyte. A matrix effect may be masking the detection. Ensure that the recommended dilution was followed as stated in the kit insert. If dilution was recommended, check to be sure that the dilution was performed properly. Over-dilution may cause the sample to fall below the range of the standard curve.

13.  How do you recommend I wash my plate?

If you are using an automated plate washer we recommend that the calibration be checked on a regular basis, ａnd that the system is flushed with the Plate Washing Buffer prior to washing. The same is true for a manual washer. A repeater or a wash bottle can also be used. The user should be careful to ensure that all of the contents are aspirated ａnd the plate tapped dry on lint-free paper.

14.  Do I need to use a plate shaker?

Reliable results can be obtained without a plate shaker, but the O.D.＇s will generally be lower than those obtained using a plate shaker.

15.  Why do I have to use wavelength correction between 450-570nm?

For the ELISA assay, reading at dual wavelengths is done to correct for the optical density contributed by the plastic well, the lamp ａnd optical fluctuations. 【小鼠γ干扰素(IFN-γ)ELISA试剂盒价格】

16.  If I extract my sample, do I still need to follow the recommended dilutions given in the kit insert?

The amount of sample dilution needed after an extraction procedure will be affected by the effects of purification ａnd concentration in the protocol used. The amount of dilution or concentration will have to be determined by the end-user.

17.  What is the expected concentration of analyte that I should expect to find?

The amount of a given analyte may vary not only from species-to-species, but also between tissue ａnd cellular sources. The best source of this information is the current literature that is easily accessed through the Internet at multiple scientific databases.

18.  My optical densities were a little higher (or lower) than those in the manual that came with my kit. Why?

The optical density is affected by a number of physical conditions such as time ａnd temperature. We suggest that you shorten or lengthen the final incubation with substrate solution to compensate.

19.  What are the reasons for High Background?

1)     Improper Washing: Check volume of washing buffer reservoir ａnd make sure all recommended washing steps are performed.

2)     Contaminated Substrate: Make sure there is no contamination of the substrate with metal ions or oxidizing reagents, before use. Keep the extra substrate solution separately during the ELISA substrate development time. 【小鼠γ干扰素(IFN-γ)ELISA试剂盒价格】

3)     Substrate exposed to light: Exposure to light may result in a blue color of the substrate. Keep solutions in the dark (vial) until ready to dispense into the plate.

4)     Wrong Incubation Times/Temperatures: Generally follow the test protocol regarding incubation times ａnd temperatures. However, if all wells are intensely ａnd equally colored with no intensity gradient observed in the standard dilution series, then it may be necessary to observe the substrate reaction as the color is developing, in order to stop the reaction sooner.

9238815  Rect. carrier for 12 tubes 10 ml w/ cap            CNY                             

9019472  TAPE SPACER CLEAR GS             CNY                             

9019464  UV tube, Cxx             CNY                             

9243650  Comprehen Valid., EZ1/QIAcube/QIAsymph    """The Comprehensive Validation Support plan specific to a laboratory＇s needs will incorporate all of the requirements for the internal validation guidelines from the FBI＇s Quality Assurance Standards (QAS).

The Comprehensive Validation Support service includes all travel ａnd labor charges for up to 20 days by the QIAGEN Validation Team. Typically, one week will be required to extract, quantify, ａnd amplify the validation study samples ａnd may require multiple individuals. Usually, two weeks is required to analyze the data ａnd one week to write the final report. The expected time period to complete the Comprehensive Validation is six weeks. The actual time may vary depending on resource availability, including laboratory time dedicated to validation activities.

Lab Work – The QIAGEN specialist(s) will travel to the laboratory to conduct the on-site validation lab work. The QIAGEN specialist team will perform ａnd complete all extractions, quantifications, amplfications, ａnd capillary electrophoresis. The laboratory is responsible for providing systems/protocols that may be needed (generally laboratory SOPs, ex. interpretation guidelines). Additionally, the laboratory staff may be required to provide additional data needed for interpretation (ex. quantification/amplification/CE results) during the data review phase of the validation.

Once the final scope of the validation is determined, QIAGEN will provide a quote for all consumables required for the validation.  Non-QIAGEN chemistry ａnd accessories are not included ａnd should  be purchased to cover the validation experimental design including qPCR, STR, NIST standards, required samples types (blood, semen, buccal samples) ａnd required substrates (swabs, materials, etc).   The Customer is expected to have all materials on-hand 1 week prior to the validation start date.

Data Analysis – The Comprehensive Validation Support plan encompasses data collection (quants, amps, CE) during the on-site visit. The laboratory may be responsible for sharing (typically electronically via e-mail) any validation data requested after the on-site visit. A QIAGEN specialist will complete all of the data analysis produced from the validation study design. This includes qPCR (quant) ａnd STR (amp) analysis ａnd linkage to starting samples.

Validation data CD/flashdrive – QIAGEN will review the validation data ａnd draft a validation summary document, ensuring compliance with the FBI＇s QAS requirements/standards. QIAGEN will send validation data in an electronic format (email/CD/flashdrive) to the laboratory. The laboratory is responsible for final compilation, any format change preferences, review ａnd signoff of the validation report. The documentation provided by QIAGEN will aide in demonstrating compliance with all accreditation guidelines during laboratory audits. Should a hard copy of the validation study be preferred, the laboratory is required to specify prior to the onset of the validation.

Post-validation QIAGEN-to-Laboratory Transfer – Following completion of the validation ａnd generation of the draft validation summary document, a designated member of the QIAGEN validation team will review the validation with the Lab Manager ａnd the Technical Leader. Following sign off on the validation report, training of the laboratory DNA staff will occur. Refer to the Post-validation Competency Training for additional information. """     CNY                             

9237333  Install, BR plus 3 integr. w. scheduling     Installation ａnd training, BioRobot System including three approved integration devices with scheduling   CNY                             

9237328  Upgrade, BR & 2 ext. devices w. sched.  Upgrade BioRobot with two approved integration devices using scheduling software  CNY                             

9237173  Shield, V-housing               CNY                             

9233208  Tubing, liquid system 2.5/1.5             CNY                             

9237155  V-Housing with Sample Needle                  CNY                             

9237150  Heater Top                CNY                             

9016151  #App. Package, M48, Pathology               CNY                             

9019179  Opto - plate lock closed, PyroQ96MD               CNY                             

9011883  Upgrade, high speed pipetting system             CNY                             

9011882  Back unit, BR9600            CNY                             

9011823  Z-Modul; Tip-Adapter 300µl; BR8000               CNY                              【小鼠γ干扰素(IFN-γ)ELISA试剂盒价格】

9236916  3 Year Warranty, LiquiChip       LiquiChip 3-year Warranty with 1 Preventive Maintenance per year.  Included in system price.  This warranty must be included as a line item on the system quote.  It covers the system for three years total including all per incident travel ａnd labor charges, all repair parts, one preventive maintenance visits per year (three in total), ａnd 48- hour priority response.     CNY                             

9019143  Power supply, PyroQ96             CNY                             

9019129  Cable - Reagent, PyroQ96ID             CNY                             

9019126  PCB 2 - Connection, PyroQ96ID                 CNY                             

9019114  IPC mainboard, PyroQ96ID               CNY                             

9019025  Worktable, side wall, left, EZ1xl                CNY                             

9019012  Motor Y, EZ1xl          CNY                             

9018942  Adapter, 2xRing of 12 COBAS Amplicore          CNY                             

9022737  Rotor-Gene AssayManager SOW              CNY                             

9016061  Tubing Set, Syringe inlet, BR8000 I           CNY                             

9015823  CD, Field Syringe Calibration, BR8000              CNY                             

9015690  Rings (10), pinching, 4.5/3.2 mm               CNY                             

9015599  CD, Manual, Service, BIOROBOT 8000 II                   CNY                             

9015587  EZ1 DNA Buffy Coat Card         Pre-programmed card for BioRobot EZ1 DNA Buffy Coat Protocol          CNY                             

9019166  Lead screw - X, PyroQ96MD             CNY                             

QY-x950   人结肠腺癌细胞HCT-8                                                

QY-x951   耐长春新碱结肠癌细胞系HCT-8/VCR                                                 【小鼠γ干扰素(IFN-γ)ELISA试剂盒价格】

QY-x952   人结肠腺癌细胞HT-29                                                

QY-x953   人十二指肠腺癌细胞HuTu-80                                                    

QY-x954   人结肠癌细胞Loo                                               

QY-x955   人结肠癌细胞SW480                                                  

QY-x956   人结肠癌细胞SW620                                                  

QY-x957   人结肠癌细胞T84                                               

QY-x958   人结肠癌细胞Lovo                                                       

QY-x959   结直肠癌细胞LOVE1                                                   

QY-x960   人结肠癌细胞Ls-174-T                                                

QY-x961   人结肠癌细胞LS174T                                                  

QY-x962   人结肠癌细胞CW-2                                                      

QY-x963   人结肠癌细胞RKO                                              

QY-x964   人结肠癌转基因细胞RKO-AS45-1                                                       

QY-x965   人结肠癌转基因细胞RKO-E6                                                      

QY-x966   人大肠癌细胞CL187/CCL187                                               

QY-x967   人大肠癌细胞SW116                                                   【小鼠γ干扰素(IFN-γ)ELISA试剂盒价格】

QY-x968   人大肠癌细胞PA319                                                    

QY-x969   人盲肠腺癌细胞（未分化）Hce-8693                                              

QY-x970   人结直肠腺癌细胞HCT-15                                                  

QY-x971   人结直肠腺癌细胞LS174T                                                  

QY-x972   人结肠腺癌细胞LS180                                                

QY-x973   人高分化结肠腺癌细胞系THC-8307                                                  

QY-x974   人结直肠腺癌上皮细胞DLD-1                                                    

QY-x975   人小肠癌细胞系HIC                                                    

QY-x976   人结肠癌细胞HRT-S1