产品名称：模具控温机系列 mould temperature controlled

产品特点：

1、可根据需要任意选择以水或热媒油当传热介质。
water/oil dual purpose mmachine can use either water or oil heating medium.

2、选购配备的pid智慧型自动演算的温度控制器，能准确显示和控制模具温度于所需要的温度±1℃内。
optional pid temperature controllers are used for accurate control of temperature within ±1℃

3、两段式加热结构设计，可视所需之温度增减电力，并配合特殊之发热构造，可省时省电。
two step heating se-lector gives rapid temperature increase control when required thus saning time & power i.e. start up in mornings。

4、设想周到的各种电子保护装置，如无熔丝开关，缺水或缺油，温度异常及泵浦过负荷等自动警示系统，回路能自动切断，确保安全。
safety device containing an audible alarm will break the circuit automatically when the pump is overloaded,temperature overheats or there is a shortage of oil or water.

5、油温可达199度。
the hotest temperature is 199℃.